CM42-EZS-II-WH

CM42-EZS-II-WH
Find a Reseller
In stock
SoundTube 4" 2-way In Ceiling Speaker in White with Short Can

Soundtube CM42-EZs-II Coaxial In-Ceiling Shallow Backcan Speaker in White

Engineered for applications with limited plenum space incorporating a SoundTube-specific shallow backcan with an installed depth of only 3.5 inches. One 4 inch (102 mm) treated fiber woofer with cloth surround and one 0.75 inch (19 mm) silk dome tweeter. Easy-access six-position tap switch for 25/70.7/100-volt and 16 ohm transformer bypass position allows for easy ordering, stocking and installation. Reduced amplification costs with maximum efficiency including 87.5 dB sensitivity and 16 ohm impedance. Superior voice intelligibility with an average coverage angle of 100 (210 kHz, independently verified). Cost-effective 16 ohm settings allows for the use of multiples of two, four, or six speakers in a system using a standard amplifier without a transformer. Incorporates a painted steel grille for lasting durability. Ceramic input terminal accepts up to 10 gauge plenum rated signal wire and includes thermal fuse. Suitable for use in voice alarm applications subject to EU regulations EN60849 and BS5839-8. EN54-24 listed. Clamping allowance from 0.00 in. (0.0 mm) to 1.50 in. (38.1 mm). UL 1480 (UEAY) and 2043, CE (EMC Directive 89/366/EEC, EN55020, EN55013) approved.

Included accessories: Choose between a tile bridge or a pre-construction bracket, UL-listed 0.5-inch flex conduit clamp, paint shield and two wire nuts.

Owner's Manual | Tech Sheet | Mechanical Drawing | A&E Specs | GLL | Revit | DWG | EASE 4.0 | EASE 3.0 | CLF1 | CLF2 | EN54 Certification | UL Certificate

About SoundTube
More Information
ColorWhite
UPC752830451483
ManufacturerSoundTube
Manufacturer's CategoryCM-EZ Economical In-Ceiling
Shipping Weight5 lbs / 2.27 kg
Carton Height5.5 in / 139.7 mm
Carton Length9 in / 228.6 mm
Carton Width9 in / 228.6 mm
CertificationsCE, EN54, RoHS, UL1480A, UL2043
Enclosure PropertiesABS, Sealed, Steel
Enclosure Volume100 cu in / 1638.71 cu cm
Included AccessoriesConduit Clamp, Cover Plate, Grille, Paint Mask, Choose Between a Tile Bridge or Pre-Construction Bracket
Optional AccessoriesWhite Grill (GRL-CM42-II-WH)|Tile Bridge (AC-CMEZ42-TB)|Pre-Construction Bracket (AC-CMEZ4-PCB)|Paint Mask (AC-CM-PM4EZ)|Junction Box (AC-CM-EZ-JBOX)
Source Inputs4 Pin Ceramic Terminal
TAA Compliant (Trade America)No
BAA Compliant (Made in USA)No
Backcan Diameter5.78 in / 146.8 mm
Backcan Height3.75 in / 95.3 mm
Coverage Angle (±6dB @ 2kHz) 95°
Crossover Frequency5.0 kHz
Cutout Width/Diameter6.5 in / 165.1 mm
Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz)4.3 and 4.2
Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz)5.7dB and 6.2dB
Frequency Response (± 10 dB)125 Hz - 22 kHz
Frequency Response (± 3 dB)160 Hz - 20 kHz
Grille PropertiesStandard-Flange, Magnetic, Powder-Coated, White, Paintable, Steel
Low Frequency Voice Coil0.5 in / 12.7 mm
Low Pass Crossover12 dB per octave 2nd order
Max. Ceiling Thickness0.97 in / 24.6 mm
Max. Continuous Power RMS20W
Max. Program Power40 W
Minimum Impedance (Ω Ohms)15.5 Ω
Network Type: High Pass6 dB per octave 1st order
Nominal Impedance (Ω Ohms)16 Ω
Tweeter Driver.75" Silk Dome
Woofer Driver4" Treated Fiber Cone w/ Cloth Surround
Sensitivity dB @ 1W/1M87.5 dB
Sensitivity dB @ 2.83V/1M84.5 dB
Tap SelectorRotary Switch
Transformer Options25 / 70.7 / 100 V, 16 Ohm direct
Transformer Taps Max. Setting (25V/70.7V/100V)2.5W/20W/20W
Visible Diameter7.5 in / 190.5 mm
Visible Height0.33 in / 8.4 mm

Related Products

Check items to add to the cart or
Copyright © MS Electronics. All rights reserved.